DREITEILIGE PIVOTS
VON RIVERHAWK
ÜBERSICHT
Double Ended Free-Flex® Pivots are another popular design of Riverhawk's flexures but can carry higher radial loads than single ended pivot bearings. Similar to the cantilevered design it was also possible to create an extensive standardized product line.
Double Ended Flexures are mounted with both ends attached which allows the center portion to rotate. The Double Ended pivots are used in applications such as seismometers, weigh stations, linkage systems, u-joints and many more. You can find out more about the different applications in the DATA & DOWNLOADS section.
-
Both ends fixed, center portion rotates
-
Supports suspended loads
-
Carries high radial loads
Scroll down to see the standard design offerings including technical data and direct links to the individual pages.
ITEM | IMAGE | SPRING RATE (Nmm/deg) | TENSILE LOAD (Vt) | PRESSURE LOAD (Vc) | DIAMETER (mm) |
|---|---|---|---|---|---|
Free-Flex Pivot 6010-400 | 25,24 | 782,9 | 782,9 | 7,938 | |
Free-Flex Pivot 6010-600 | 3,23 | 693,9 | 489,3 | 7,938 | |
Free-Flex Pivot 6010-800 | 0,41 | 129 | 62,3 | 7,938 | |
Free-Flex Pivot 6012-400 | 43,39 | 1125,4 | 1125,4 | 9,525 | |
Free-Flex Pivot 6012-600 | 5,42 | 1000,8 | 707,3 | 9,525 | |
Free-Flex Pivot 6012-800 | 0,66 | 186,8 | 88,1 | 9,525 | |
Free-Flex Pivot 6016-400 | 102,59 | 2001,7 | 2001,7 | 12,7 | |
Free-Flex Pivot 6016-600 | 12,81 | 1779,3 | 1258,8 | 12,7 | |
Free-Flex Pivot 6016-800 | 1,6 | 333,6 | 157,5 | 12,7 | |
Free-Flex Pivot 6020-400 | 209,02 | 3127,1 | 3127,1 | 15,875 | |
Free-Flex Pivot 6020-600 | 26,22 | 2780,1 | 1966,1 | 15,875 | |
Free-Flex Pivot 6020-800 | 3,33 | 520,4 | 244,7 | 15,875 |